BSZ大氣曝曬架

說明：高聚物在戶外的使用壽命評估目前全世界比較流行的方法是用加速老化實驗（氙燈或熒光紫外），但其試驗結果與戶外實際使用壽命目前尚無很好的相關性，畢竟戶外環境千差外別。戶外直接曝曬試驗是最能直接反映材料的耐候性，

我公司自行開發設計的大氣曝曬架按GB/T 9276設計。全部采用高級耐腐蝕的鋁型材制作，具有可調曝曬角度、可拆卸、適合任意形狀大小尺寸的曝曬樣板等優點。

主要技術參數

■  材質：耐腐蝕鋁型材

■  外形尺寸：2085mm×1010mm×1140mm（傾斜角度45度時為1550mm）

■  一次可曝曬標準樣板42塊（250×150mm）

大氣曝曬架曝曬試驗架符合GB/T9276 暴曬架大氣曝曬實驗架

REC-65M充電式棘輪切刀齒輪剪銅鋁電纜

Q-RACK 戶外曝曬架測試標準ASTM C1589Standard Practice for Outdoor Weathering of Construction Seals and SealantsThis practice describes outdoor exposure procedures used to determine the weathering durability of building construction, seals and sealants.
ASTM C1589建筑密封件和密封劑戶外老化的標準測試方法本測試方法描述了用于測定建筑結構密封件和密封劑老化耐候性的戶外曝露測試程序。
ASTM D1006Standard Practice for Conducting Exterior Exposure Tests of Paints on WoodThis practice covers procedures to be followed for direct exposure of house and trim paints on new, previously unpainted wood materials to the environment.
ASTM D1006木器涂料外觀曝露測試的標準測試方法本測試方法規定了對房屋和新的、以前未上漆的木質材料上的裝飾涂料直接曝露在環境中要遵循的程序。
ASTM D1014Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal SubstratesThis practice covers procedures to be followed for direct exposure of exterior paints and coatings to the environment when applied to metal surfaces.
ASTM D1014金屬底板上油漆和涂料外觀曝露測試的標準測試方法本測試方法規定了對用于金屬表面的外部油漆和涂料直接曝露在環境中要遵循的程序。
ASTM D1435Standard Practice for Outdoor Weathering of PlasticsThis practice is intended to cover procedures for the exposure of plastic materials to weather. Note 1See Practice G 24 for aging under glass.
ASTM D1435塑料戶外老化標準測試方法本測試方法旨在規定塑料材料進行曝露老化測試的程序。 請參見測試方法 G 24 玻璃下老化現象。
ASTM D3456Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological AttackThis practice provides guidelines for determining the susceptibility of paint films to microbiological attack on exterior exposure. While it is recognized that various organisms may occur on an exposed coating, the specific types of organisms are mainly of academic interest. The degree to which microbiological discoloration occurs is the primary concern.
ASTM D3456漆膜對微生物攻擊的敏感性的外部曝露測定的標準測試方法本指南對測定曝露在外部的漆膜受微生物攻擊的影響提供指導。 雖然人們認識到，曝露的涂層上可能會出現各種生物體，但研究的重點主要集中在特定類型的生物體上。 在微生物變色的程度是首要關注的問題。
ASTM D3679Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) SidingThis specification establishes requirements and test methods for the materials, dimensions, warp, shrinkage, impact strength, expansion, appearance, and windload resistance of extruded single-wall siding manufactured from rigid (unplasticized) PVC compound. Methods of indicating compliance with this specification are also provided.
ASTM D3679硬性聚氯乙烯（PVC）墻板標準規范本規范規定了對擠壓單壁壁板的要求和測試方法，包括材料、尺寸、翹曲、收縮、沖擊強度、膨脹、外觀和風阻，壁板由剛性（未增塑）PVC復合物制造而成。 還提供了表明符合本規范的方法。
ASTM D5970Standard Test Method for Deterioration of Geotextiles from Outdoor ExposureThis test method covers evaluating the deterioration in tensile strength and strain after outdoor exposure.
ASTM D5970土工布戶外曝曬老化的標準測試方法該測試方法規定了戶外曝露后的拉伸強度和應變退化的評估。
ASTM G7Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic MaterialsThis practice covers procedures to be followed for direct exposure of nonmetallic materials to the environment. When originators of a weathering test have the actual exposure conducted by a separate agency, the specific conditions for the exposure of test and control specimens must be clearly defined and mutually agreed upon between all parties.
ASTM G7非金屬材料大氣環境曝露試驗的標準測試方法本測試方法是非金屬材料直接曝露在環境中的操作程序。當老化測試客戶委托獨立的機構進行實際曝露測試時，暴露測試和樣品制備的具體情況必須明確界定，且試驗各方之間必須達成共識。
Ford FLTM BI 160-01Florida and Arizona Outdoor Exposure Test
Ford FLTM BI 160-01佛羅里達和亞利桑那的戶外曝露測試
GMW 14873Outdoor Weathering of Automotive Exterior Materials
GMW 14873汽車外飾材料戶外老化
IEC 61215Crystalline Silicon Terrestrial Photovaltalic (PV) Modules - Design Qualification and Type Approval
IEC 61215地面用晶體硅光伏組件（PV）－設計鑒定和定型
ISO 2810 (EN) (DIN)Paints and Varnishes - Notes for Guidance on The Conduct of Natural Weathering Tests
ISO 2810 (EN) (DIN)色漆和清漆 - 自然老化測試實施的指導注意事項
LP463-KB19-01Outdoor Exposure of Trim Materials
LP463-KB19-01裝飾材料的戶外曝露
LP463-PB34-01Florida Exposure Testing of Painted Surfaces
LP463-PB34-01油漆表面佛羅里達測試